Siemens 2011 - Manual (Page 24)

Operating modes
13
kap04.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Signalling method
Telecom telephone lines can operate with the following
signalling methods:
● Dial pulsing (DP)
● Dual-tone multifrequency signalling (DTMF)
Your Gigaset 2011 is set to DTMF signalling by default.
Checking the signalling method of your telephone line
Setting the signalling method
( t means: scroll with u
, confirm with x
) Z OK
If your telephone line is connected to a digital
switch, you can use both dial pulsing and DTMF
signalling. In this case, leave the default DTMF
setting or reset it, for example, after relocating
your handset.
c Press the Talk key. You will hear the dial tone.
o
Press any digit, e.g. 2. If you still hear the same dial tone,
you must switch the signalling method to dial pulsing
(DP).
.t Service Initiate the procedure.
#1 Initiate the base function.
o
Enter the four-digit base code (factory default: "0000")
(➔ page 43).
u @33x Set to dial pulsing.
or
u @37 x Set to DTMF.
REDIAL SET
REDIAL SET