Siemens 2011 - Manual (Page 87)

Operating at more than one base station
76
kap17.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Base station names
You can change the preset base station names ("Base 1" to
"Base 6"). In a company, one station can be called "Pur-
chasing", for example, and another "Stock". You can also
use this function to name handsets (➔ page 73)
( t means: scroll with u
, confirm with x
) Z OK
Activate Change Base Name in the additional menu.
If you change a name (➔ page 37), save it with "Save En-
try".
You can exit the relevant menu levels at any time without
saving any changes by pressing .
De-registering a base station
This menu option is for de-registering the handset if the
base station is no longer available, i.e. if it is defective or
at a remote location.
Activate De-register base in the additional menu.
.t Settings t Base Settings
u Select the base station you want to rename.
Z
x t Change Base Name W
x t Save Entry W
The menu item ISDN Config. does not apply to
Gigaset 2011.
{
.t Settings t Base Settings
u Select the base station you want to de-register.
Z
x t De-register base W
The registration data is only deleted in the hand-
set if you perform this function on the handset.
To ensure that your handset is de-registered at
the base station, the de-registration must be
performed at your base station (➔ page 70).