Siemens 2011 User Manual
Page 27
Incoming calls
16
kap05.fm5
18.7.99
Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
External call-waiting during internal calls
The call waiting beep signals an external call while an in-
ternal call is in progress. Your internal connection is
cleared down if you accept the external call. The external
call is signalled on the display:
Ending a call
Deactivating the microphone (mute function)
You can deactivate the microphone while an external call
is in progress. This allows you to consult other people in
the room while the external party is on hold. The external
party cannot what you are saying and will hear music.
:
x
You accept the external call immediately.
or
a Disconnect the internal call. You will hear the ring tone.
c Accept the external call.
EXTERN INTERN
2
ACCEPT
ACCEPT
Replace the handset in the base station or charging unit.
The line is disconnected.
or
a Clear down the connection.
If the handset was in protected mode, it re-
mains in this mode after you press
a
.
u
Set up a connection.
The microphone is deactivated. Hold consultation with
people in the room.
R Activate the microphone. You are reconnected with the
external party.
INT