Siemens 2011 - Manual (Page 80)

Registering/de-registering more than one handset at the base station
69
kap15.fm5 18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Registering/de-registering more than one handset at the base
station
You can operate up to six handsets of the types Gigaset
2000S and/or Gigaset 2000C or Gigaset 2000T as well as
the Gigaset 1000TAE cordless socket at a Gigaset 2011
base station.
The standard Gigaset 2000C handset supplied is already
registered at the base station with the internal call
number 1 and base number 1.
Each additional handset that you purchase must be regis-
tered at the base station. We recommend that you keep
the base number 1 for this base station when registering
other handsets at the base station.
Registering a Gigaset 2000C handset at a base station
( t means: scroll with u
, confirm with x
) Z OK
Prepare the base station
Register the handset
If you want to operate your handset at more
than one base station (up to six) (➔ page 71),
you must repeat the following procedure at
each base station.
.t Settings t Register
u x The available base stations are
displayed (1 to 6). Select a base
station (recommendation: Base
1)
Z OK
Z W Y {
Base 1
Base 2
Base 3
? Press the green paging key on the base station until you
hear the logon tone (after approximately ten seconds).
o
x
Enter the four-digit base tele-
phone base code and confirm (fac-
tory default: "0000"). The handset
is now registered at the base sta-
tion.
2 … 6 The unassigned internal numbers
are displayed. Use the dialling key-
pad to select one of these num-
bers as the handset number.
OK Enter
base code:
* *
_
Y Z OK
X
2 3 4 5 6