Speco Technologies DVR-16TS - Manual (Page 92)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08 91
5.4.6 Data Lifetime
Data Lifetime indicates the time that a recording is saved and remains in the
HDD, between the creation and deletion of a record. Only those video files
recorded during Data Lifetime will be displayed on the screen and can be
played back; those video files recorded outside the duration time will be
hidden.
Press ENTER to select this item in Record Setup menu, and then use UP /
DOWN keys to set the data lifetime. The value ranges from <1> to <365>
days, or select <0> to disable the function.
NOTE:
If you want to play back the video, which is outside the data
duration of lifetime, please extend the duration till the recording
data/time of the video is included.
5.4.7 Pre-Alarm Recording
This item is used to set the duration time of pre-alarm recording video. The
pre-alarm recording function aims to give the user the opportunity to view a
more complete event video. The user can see the video recorded after the
alarm is triggered, and the video recorded ahead the alarm.
When an event is triggered while normal recording is in effect, the unit will
start copying the pre-alarm and the post-alarm video to the event video. The
pre-alarm duration can be set from 0~30 seconds. The default setting is 15
seconds.
The quality of the pre-alarm video is the same as the quality setting for normal
record video; and the quality of the post-alarm video is the same as the quality
setting for event record video.
5.4.8 Circular Recording
The user can choose to record video in circular mode or in linear mode. If you
choose to record in circular mode, then the unit begins to overwrite the oldest
recorded video and stores new video over the HDD spaces. If you choose to
record in linear mode instead, the unit stops recording when the HDD is full.
From the Record Setup menu, move the cursor to and
press ENTER, then select / using UP / DOWN keys.