Speco Technologies DVR-16TS - Manual (Page 89)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
88
5.4.3 Preset Record Configuration
The is used to select the preset recording quality and frame
rate. Different default recording quality levels are offered for the user to
choose: , , , ,
and .
According to various Record modes, the preset configuration options for
normal and event status are described in terms of relative recording rate
(Picture per Second; PPS) and recording size for each channel in the table
below.
These preset conditions override any other quality and rate settings. The
default Preset Configuration setting is .
You can refer to
Appendix B: Record Configuration for detailed information.
5.4.4 Per Camera Configuration
This submenu is used to set the Day / Night / Weekend PPS (Picture per
Second) and recording quality for each channel. The
must be set to for accessing these schedules.
The menu is displayed below is in Record mode: 720×240@30PPS in NTSC /
720×288@25PPS in PAL).
Per Camera Config
Cameral Select
Normal PPS
Normal Qlty
Event Max PPS
Event Qlty
Event Act
Day
7.5
MId
30
Best
Both
Night
7.5
Mid
30
Best
Both
CH1
Weekend
7.5
Mid
30
Best
Both
5.4.4.1 Camera Select
This item is used to select a desired channel for setting the associated
parameters. Move the cursor to and press ENTER, then
select a channel using UP / DOWN keys. Press ENTER again to confirm the
setting.