Speco Technologies DVR-16TS - Manual (Page 42)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08 41
Select Device
Device Name
xxx-xxx-x-x-xx
xx-xxx-xx-xxxx Available
256 MB
1.5 GB
Sel
NO
NO
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit only supports EXT3 file
system. If you connect an external HDD to the unit, make sure the format of
the HDD is EXT3. If not, please format this HDD to EXT3 first.
This item shows the name of the available device.
This item shows the free space of the available device.
Set the item to to start the export or to cancel.
4.4.1.2 Select Video for Exporting After selecting video clips, set the item to and press
ENTER to start exporting. Following are the menu items for selecting video.
Select Channel
Select the channel that the administrator wants to export. Move the cursor to
the desired channel using LEFT/ RIGHT keys, select or de-select a channel
by pressing ENTER. From/ To Time
These items are used to set the time in which data export begins and ends.
Move the cursor using Direction keys, and press ENTER to select the date/
time items; adjust the selected date and time value by UP / DOWN keys.
NOTE: The exported data between the Start Time and End Time includes both normal and event video. Select Events
Select the item to display the event list for exporting event video. Move the
cursor to scroll through the event list and press ENTER to select the event
you want to export. Pages: 1 … 40 41 42 43 44 … 148 wrong Brand wrong Model non readable This manual is related to the following products: DVR-8TN See also other documents in the category Speco Technologies Camcorders: CVC230HZ (28 pages) DVR-16TN (139 pages) 10X PAN-TILT HTSD10X (29 pages) DNR Bullet Day/Night Weather-proof Camera VL7039IRVF (33 pages) CVC61HRB (4 pages) Sitemap
4.4.1.2 Select Video for Exporting
After selecting video clips, set the item to and press
ENTER to start exporting. Following are the menu items for selecting video.
Select Channel
Select the channel that the administrator wants to export. Move the cursor to
the desired channel using LEFT/ RIGHT keys, select or de-select a channel
by pressing ENTER.
From/ To Time
These items are used to set the time in which data export begins and ends.
Move the cursor using Direction keys, and press ENTER to select the date/
time items; adjust the selected date and time value by UP / DOWN keys.
NOTE: The exported data between the Start Time and End Time
includes both normal and event video.
Select Events
Select the item to display the event list for exporting event video. Move the
cursor to scroll through the event list and press ENTER to select the event
you want to export.