Speco Technologies DVR-16TS - Manual (Page 100)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08 99
The available options are , , and . Select
to disable this function. Selecting will apply audio warning
pre-stored in the DVR. allows the user to apply user-defined
audio warning. Note that the user-defined audio has to be set before choose
option, or the following message will be shown:
Warning!!
No user-defined file is in the DVR!
Please create customized file first!
The steps are similar to ezBurn
Note: Cannot exceed 5 seconds
Press any key to return
Follow the steps below to record your own audio warning.
• Use any camera to record the preferred audio. Please note that
Recording> under menu should be set to .
• Press SEARCH and play the normal video of the recorded date and time.
• View full screen of the channel that the preferred audio was recorded.
• Press COPY at the point you want to set as the start point of the audio.
The playback continues.
• Press COPY again at the point you want to set the end point of the audio.
Now, the “ezBurn Confirmation” window displays as shown below. The
information shown on the window is for read only.
ezBurn Confirmation
Selected Device: Built-in-CD-RW
All data on the disc will be erased.
Exported Required Size = 11 MB
Real Export Range:
From: 2005/11/07 AM10:41:13
To: 2005/11/07 AM10:41:21
Enter: YES ESC: NO
or
CH1: Define Digital Deterrent File
• If there is no exportable external device connected to the DVR unit, then a
warning message will be shown on the screen, as illustrated below:
No exportable device detected.
Please install the target device/media
to the DVR.
Enter: Retry ESC: Exit
or
CH1: Define Digital Deterrent File