Speco Technologies DVR-16TS - Manual (Page 45)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
44
4.4.2.2 To Export Normal Video
To Export normal video to an external device, follow these steps:
• Press SEARCH and play desired normal video by entering date and time.
Note: if you are viewing in multiple channel mode, please make sure there
is no window displaying in Live mode. Otherwise, the export will not work.
• After entering playback mode, play the video and press COPY on the point
that you want to set the start point of the export. The playback continues.
• Press COPY again on the point that you want to set the end point of the
export. Now, the “ezBurn” window displays as shown below. The
information shown on the window is for read only.
ezBurn confirmation
Selected Device: Built-in-CD-RW
All data on the disc will be erased.
Exported Required Size = 11 MB
Real Export Range:
From: 2005/11/07 AM10:41:13
To: 2005/11/07 AM10:41:21
Enter: YES ESC: NO
or
CH1: Define Digital Deterrent File
NOTE: For more information about Digital Deterrent function, please
refer to section 5.6.7.7 Digital Deterrent.
• Press ENTER to start the export; or, press ESC to abort.
• If there is not any exportable external device connected to the DVR unit,
then a warning message will be shown on the screen, as illustrated below:
No exportable device detected.
Please install the target device/media
to the DVR.
Enter: Retry ESC: Exit
or
CH1: Define Digital Deterrent File
4.4.2.3 To Export Event Video
To export event video, follow these steps:
• Press SEARCH and play desired event video. To play event video, refer to
section 4.3 Searching Recorded Video.
• After entering the playback mode, press COPY. The “ezBurn” window
displays as shown below . The information displayed is for “read only.”