Speco Technologies DVR-16TS - Manual (Page 72)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08 71
Dial-out DHCP
This item allows the user to obtain a dynamic IP address from a DHCP
(Dynamic Host Configuration Protocol) server over a modem connection. If
the item is enabled (ON), a dynamic IP will be assigned to the DVR-4TN/ 8TN/
16TN/ 16TS/ 16TT
series unit. In this case, the user does not need to
configure a static IP and the following settings will be “read only.”
Select to enable the DHCP function, or to set the dial-out IP
address, Netmask, Gateway and DNS manually. The default setting is .
Dial-out IP
This item is for setting a static IP address that identifies the DVR-4TN/ 8TN/
16TN/ 16TS/ 16TT
series unit over a modem connection. Set the
DHCP> to for accessing this item.
Move the cursor over and press ENTER, then press UP /
DOWN keys to change the values in the selected field.
Dial-out Netmask
This item is for setting the Netmask that identifies the DVR-4TN/ 8TN/ 16TN/
16TS/ 16TT T
series unit over a modem connection. To configure the item,
DHCP must be set to .
Move the cursor over and press ENTER, and then press
UP / DOWN keys to change the values in the selected field.
Dial-out Gateway
Users are allowed to specify the IP address of the gateway or router
associated with this unit. To configure this item, DHCP must be set to .
Move the cursor over and press ENTER, and then press
UP / DOWN keys to change the values in the selected field.
Dial-out DNS
This item allows the user to specify the IP address of the Domain Name
System (DNS) associated with the unit. To configure this item, DHCP must be
set to .
Move the cursor over and press ENTER, and then press UP /
DOWN keys to change the values in the selected field.