Samsung DVW-707/707P - Manual (Page 83)

Chapter 4 Adjustments and Settings for Recording
4-5
4
Black balance memory
Values stored in memory are held until the black balance is next
adjusted.
If a memory error occurs
If the error message “: STORED DATA : NG” flashes on the viewfinder
screen when the camcorder is turned on, the black balance memory
content has been lost.
Adjust the black balance again. Contact your Sony representative if this
message continues to appear even after the black balance has been
adjusted again.
For more information, refer to “maintenance manual.”
4-1-2 Adjusting the White Balance
Follow the procedure below to automatically adjust the white balance.
1
Set the switches as follows:
a) When “WHITE B” in the
OPERATION MODE
page of the menu is set
to “AWB”.
GAIN: Set as low as possible.
WHITE BAL: A or B a)
OUTPUT/DCC: CAM
(Continued)