Samsung DVW-707/707P User Manual
Page 172
Chapter 4 Adjustments and Settings for Recording
4-94
4
2
Push the MENU ON/OFF/PAGE switch repeatedly toward PAGE
(or press the rotary encoder) until the OFFSET WHT page (shown
below) appears.
3
Set the WHITE BAL switch to channel A or B.
Note
If the WHITE BAL switch is not set to A or B when you operate the
camcorder, the adjustment value will not be reflected in the output
signal.
4
Push the MENU CANCEL/PRST/ITEM switch repeatedly toward
ITEM (or turn the rotary encoder) until the cursor specifies the item
you want to change.
5
Turn the rotary encoder to change the setting of the selected
function, as follows.
OFFSET WHITE: Turns the setting of the offset for channel A
ON or OFF.
WARM-COOL: While looking at the image, adjust channel A
by turning the rotary encoder towards + (to produce a warm
image) or towards – (for a cool image).
FINE: Adjusts the value more precisely if the adjustment by
WARM-COOL is not satisfactory.
E34*OFFSET WHT
E34*OFFSET WHT
pOFFSET WHITE:? ON
OFFSET WHITE:? ON
WARM-COOL : 0
OFFSET WHITE: OFF
WARM-COOL : 0
WARM-COOL : 0
FINE : 0
FINE : 0