Samsung DVW-707/707P User Manual

Page 171

Text mode
Original mode

Chapter 4 Adjustments and Settings for Recording

4-93

4-9-6 Specifying an offset for the auto white

balance setting

By setting an offset for the value of auto white balance, you can make
the picture warmer or colder.

This setting is done in engineer mode. To change the camcorder to
engineer mode, turn the power off, then turn it on again while pressing
down the rotary encoder.

To do this setting in user mode, go to MENU SELECT 4 in engineer
mode.

For details on this setting, refer to “maintenance manual.”

Set the camcorder to engineer mode and turn the MENU ON/OFF/
PAGE switch to ON.

1,2

(Continued)