Samsung DVW-707/707P - Manual (Page 81)

Chapter 4 Adjustments and Settings for Recording
4-3
4
2
Push the AUTO W/B BAL switch to BLK, and release the switch.
The switch returns to the center position, and the adjustment is
completed.
During adjustment, the following messages are displayed on the
viewfinder screen (in display mode 2 or 3).
Message during adjustment
The black balance adjustment ends in a few seconds with the
message “BLACK : OK,” and the adjustment setting is
automatically stored in memory.
The messages change in the following
sequence : -BLACK SET-
→
-BLACK BAL- 1)
→
-CHECK-
(Continued)
AUTO W/B BAL switch
....................................................................................................................................
1) If the existing black balance adjustment is satisfactory, the message “BLACK
BAL” may not appear, that is, the automatic black balance adjustment may be
omitted to save time.
BLACK:OP
-BLACK SET-