Samsung DVW-707/707P User Manual

Page 200

Chapter 4 Adjustments and Settings for Recording

4-122

• To end reading data, push the MENU CANCEL/PRST/ITEM

switch to CANCEL/PRST.

• To continue the reading of data, go on to step

Notes

• The data and the card ID read from the card overwrite the data

stored in the camcorder. Before going on to step

, re-check the

card ID and decide whether it is necessary to read the data and
card ID from the card.

• The card stores data for both user-mode settings and engineer-

mode settings. Both sets of data are read and written together.

For more information, refer to “maintenance manual.”

• There is no setup card read-write compatibility between different

models of digital camcorder. For example, a card written by the
DVW-707 cannot be read by the DVW-790WS or DVW-707P,
and vice versa.

Press the rotary encoder once more.

While data is being read, the message “READING DATA!” is
displayed.

When reading is completed, the message “READ : OK” appears.

E11*SETUP CARD

pREAD(

READ(

pCAM)

CAM)

WRITE(

pCARD)

CARD)

ID EDIT

ID EDIT
WRITE

WRITE PROTECT

PROTECT

OFF

WHITE DATA READ: OFF

ID:

READ? (Y:PRESS)