Servis-Rhino RHINO AGM72 - Manual (Page 8)

SAFETY
General Safety Instructions And Practices
A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to the
owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and observing
certain precautions. The first section of this manual includes a list of Safety Messages that, if followed, will help protect
the operator and bystanders from injury or death. Read and understand these Safety Messages before assembling,
operating or servicing this Implement. This equipment should only be operated by those persons who have read the
manual, who are responsible and trained, and who know how to do so responsibly.
NOTE
:
Identifies points of particular interest for more efficient and convenient operation or repair . (SG-1)
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
SA
F
ET
Y
AGM 52-62-72-82 10/10 Safety Section 1-2
© 2010 Alamo Group Inc.
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca
las medidas de seguridad.
(SG-3)
Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR
VERY SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH
OR SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result in
damage to, or destruction of the machine, attachments or the environment.
Practice all usual and customary safe working precautions and above all---remember safety is up to
YOU. Only YOU can prevent serious injury or death from unsafe practices.
The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout
this manual and on decals which are attached to the equipment. The Safety Alert Symbol
means: “WARNING! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and
Signal Word are intended to warn the owner/operator of impending hazards and the
degree of possible injury faced when operating this equipment.