Servis-Rhino RHINO AGM72 - Manual (Page 113)

OPERATION
Conforming use
ROTARY DISC MOWERS have been designed and built for use in agriculture for mowing grass, pasture and
permanent grasslands, alfalfa and other kinds of fodder crop.
The machine has been designed for professional users and shall be operated exclusively by authorised
trained staff holding driving licence.
The machine is not designed for operation in other fields than agriculture.
O
PER
A
T
IO
N
The machine is for use by one operator at a time. The use of the machine for a purpose for
which it is not designed than the intended one is considered as non-conforming use.
RHINO is not liable if
safety labels
are missing, illegible or if they have been removed from their location.
If safety labels are damaged or missing, order new labels. Refer to the information contained on the machine
identification plate.
This machine has been designed for use during the day. At night or under conditions of reduced visibility use the
machine light devices.
RHINO is in no event liable for any damages and injuries, including severe injuries, to operator or other
people and property resulting from any unauthorised changes and modifications to the machine.
Adverse field conditions
This section illustrates the main adverse field conditions when using the MOWER:
Make sure that there are not any stones or rocks on the ground (diameter over 8-12cm);
Make sure that there are not any stumps higher than 10cm and diameter over 8-12cm;
Make sure that there are not any metal elements on the ground, such as nets, cables, ropes, chains,
pipes etc;
Follow recommendations for height adjustment and make sure that no one is within 50m of the
mower;
It is recommended not to work with the machine fully lowered to the ground in wet grass conditions to
avoid damaging crop and affecting performance of the machine.
AGM 52-62-72-82 10/10 Operation Section 4-3
© 2010 Alamo Group Inc.