Servis-Rhino RHINO AGM72 - Manual (Page 151)

OPERATION
Before transporting the tractor and mower, idle
the tractor engine, disengage the PTO and
wait for all mower moving parts to come to a
complete stop. Once all mower parts are
completely stopped, raise the mower to
transport height.
NOTE: When raising the
mower, maintain 1” clearance between the
driveline and mower deck. If additional mower
deck height is needed for safe transport,
disconnect the driveline from the tractor and
secure its end to the mower deck. The mower
can then be raised to the maximum lift height.
OPS-R-0033_A
O
PER
A
T
IO
N
If the tractor’s hydraulic pump is not
independent of the tractor PTO, or if the
tractor PTO has to be run to have hydraulic
power, disconnect the mower driveline from
the tractor PTO output shaft. Secure the
driveline to the mower deck to prevent
driveline damage or loss during transport.
OPS-R-0034
Before transporting the tractor on a public
roadway or boarding a trailer for transport, the
tractor brake pedals should be locked
together. Locking the pedals ensures that both
wheels brake simultaneously while stopping,
especially when making an emergency stop.
Use extreme caution and avoid hard
applications of the tractor brakes when towing
heavy loads at road speeds. Never tow the
implement at speeds greater than 20 MPH (25
kph).
OPS-U- 0018
AGM 52-62-72-82 10/10 Operation Section 4-41
© 2010 Alamo Group Inc.