Servis-Rhino RHINO AGM72 - Manual (Page 106)

ASSEMBLY
STEP 29. Mount the cutters on the discs and follow rotating direction (right and left). It is recommended to install the cutters
from the rear (Picture 29.1) except for the most external disc where cutters must be mounted from the front (Picture 29.2).
Fasten the cutters with 2 screws M12 and 2 flanged knurled nuts M12 from the cutters bag.
Picture 29.1
Picture 29.2
STEP 30. Mount the rear bar and secure it to the upper rod with 4 cylinder hexagon head set screws M12x50 and 4 self-
locking nuts M10.
A
SSEM
B
L
Y
AGM 52-62-72-82 10/10 Assembly Section 3-16
© 2010 Alamo Group Inc.