Servis-Rhino RHINO AGM72 - Manual (Page 14)

SAFETY
Do not get on the machine or allows riders while the machine is in operation.
SA
F
ET
Y
After hitching make sure that the drive shaft is installed properly. Make sure that
the drive shaft guards are in good conditions.
Replace worn or damaged drive shaft guards.
When the machine is not connected to the power takeoff, the hydraulic hoses and
the drive shaft shall be properly secured to their support elements.
Make sure that hydraulic hoses are properly installed.
Check hydraulic hoses for wear and replace them if necessary (anyway at least every 6
years).
Detach the machine on level ground, with the cutter bar lowered to the ground, with the
aid of the stand. Make sure that the machine is level.
Before performing maintenance under raised parts of the machine secure them using
suitable blocks.
Never stand between the tractor and the mower when the engine is running and
the power takeoff is engaged.
Make sure that the discs have stopped before approaching the machine.
Pinching and crushing hazard when bringing the to the transport and working
position. Operate with the machine more carefully and keep others away from the
area.
AGM 52-62-72-82 10/10 Safety Section 1-8
© 2010 Alamo Group Inc.