Servis-Rhino RHINO AGM72 - Manual (Page 21)

SAFETY
Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement,
any of its components or any Implement function.
(SG-8)
Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death.
(SG-14)
SA
F
ET
Y
Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion
or while tractor engine is running.
(SG-20)
Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn or
broken parts, and leaky or loose fittings. Make sure all pins have cotter
pins and washers. Serious injury may occur from not maintaining this
machine in good working order.
(SG-21)
Do Not fill fuel tank while engine is running. Refuel only after engine has cooled down. If fuel
is spilled, move machine away from the area of the spill and avoid creating any source of
ignition until the gasoline has evaporated .
(SG-28)
Perform service, repairs and lubrication according to the maintenance section. Ensure the unit
is properly lubricated as specified in the lubrication schedule and all bolts and nuts are
properly torque. Failure to properly service, repair and maintain this Implement in good
operating condition could cause component failure and possible serious injury or even death.
(SG-35)
Use caution and wear protective gloves when handling sharp objects such as blades, knives,
and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharp
surfaces can inflict severe laceration injuries if proper hand protection is not worn .
(SG-37)
AGM 52-62-72-82 10/10 Safety Section 1-15
© 2010 Alamo Group Inc.