Sherwood Newcastle R-972 - Manual (Page 75)

75
SETTING THE SOUND PARAMETER
When selecting the Night Mode
• This function compresses the dynamic range of previously specified parts of the Dolby Digital, Dolby TrueHD or DTS sound
track (with extremely high volume) to minimize the difference in volume between the specified and non-specified parts.
This makes it easy to hear all of the sound track when watching movies at night at low levels.
■
Notes:
• The night mode setting is valid only when the digital signals from the Dolby Digital, Dolby TrueHD or DTS program source
are being input.
• In some Dolby Digital softwares, the night mode setting may not be valid.
■
When selecting the DOLBY/DTS
■
When selecting the Dolby TrueHD
• Night Mode/DRC : To adjust the dynamic range compression that makes
faint sound easier to hear at low volume levels.
• Dolby PL II Music : To adjust the various surround parameters for optimum
surround effect.
• Dolby Virtual Speaker : To select the speaker layout to be used actually for
each Dolby Virtual Speaker mode.
• Dolby Headphone : To select the desired listening mode for Dolby
Headphone mode.
0.0 (Off)
↕
0.1 (Low) Lower compression
↕
0.2
:
:
:
0.9
↕ Higher compression
1.0 (Max)
1.
Press the CURSOR UP(
▲)/DOWN(▼) buttons to select the desired parameter.
2.
Press the CURSOR LEFT(
◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired.
DOLBY / DTS
Dolby TrueHD
E
N
G
L
IS
H
Auto : To adjust the dynamic range compression
↕ automatically.
On : To turn on the dynamic range compression function.
↕
Off : To turn it off.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 75