Sherwood Newcastle R-972 - Manual (Page 43)

E
N
G
L
IS
H
43
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the band changes as
follows :
→ FM STEREO → FM MONO → AM → XM
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode
("STEREO" goes off) to reduce the noise, then FM
broadcasts are reproduced in monaural sound.
• To listen to XM Satellite Radio, select XM mode. (For
details, refer to "XM Satellite Radio (only for North
America)" on page 45.)
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band, press the TUNING
UP(+)/DOWN(-) buttons repeatedly until the right
frequency has been reached.
Manual tuning
• Auto presetting function automatically searches for FM
stations only and stores them in the memory.
• While listening to FM or AM radio
broadcasts, press and hold down the
ENTER/MEMORY button for more than 2
seconds.
• Then "AUTO MEMORY" flickers and
this receiver starts auto presetting.
• Up to 30 FM stations can be stored.
■Notes:
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, preform
"Manual presetting" procedure with using "Manual tuning"
operation.
Auto presetting
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED".
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
1.
Select the desired band.
2.
Press the TUNING UP(+)/DOWN(-) buttons for
more than 0.5 second.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 43