Sherwood Newcastle R-972 - Manual (Page 44)

E
N
G
L
IS
H
44
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If "MEMORY" goes off, start again from the above step 2.
■
MEMORY BACkUP FUNCTION
The following items, set before the receiver is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
Scanning preset stations in sequence
• The receiver will start scanning the stations in the preset
sequence and each station is received for 5 seconds.
• At the desired station, press this button again to stop
scanning.
Tuning to preset stations Manual presetting
• You can store up to 30 preferred stations in the memory.
• "MEMORY" is flickering for several seconds.
• After selecting the tuner as an input source, select the
desired preset number.
1.
Tune in the desired station with auto or manual
tuning.
3.
Select the desired preset number (1~30) and
press the ENTER/MEMORY button.
4.
Repeat the above steps 1 to 3 to memorize
other stations.
2.
Press the ENTER/MEMORY button.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 44