Sherwood Newcastle R-972 User Manual
Page 54
E
N
G
L
IS
H
54
• ROOM 2 ~ is displayed for several seconds.
• On the ROOM 2 remote control, press the ROOM 2 ON
( I ) button to enter the ROOM 2 ON mode or press the
ROOM 2 OFF ( ) button to enter the ROOM 2 OFF
mode.
• Each time the ROOM 2 button on the universal remote
control is pressed, the ROOM 2 mode changes as
follows :
ON : To turn on the ROOM 2 function.
↕
(" " lights up.)
OFF : To turn it off. (" " or " " goes off
depending on the AMP ASSIGN setting.)
■Note :
• When the ROOM 2 mode is set to OFF, you cannot
adjust the ROOM 2 volume and tone (bass and treble).
MULTI ROOM OPERATION
• In addition to your main room, you can also enjoy playback in two other rooms (ROOM 2 and ROOM 3).
■Notes:
• The analog signals from the EXTERNAL INs and the digital signals (including signals from the USB IN) cannot be output to
the other rooms, meaning no playback in ROOM 2 and ROOM 3.
• The HDMI video signals and the component video signals cannot be output to the other rooms.
• You can select different sources for main room and second room (ROOM 2) and play them at the same time.
• When you connect the multi-room system kit to the IR IN jack of this receiver, you can control this receiver with not only the
universal remote control unit but also the ROOM 2 remote control unit in a second room(ROOM 2), too. (For details, refer to
"CONNECTING MULTI-ROOM SYSTEM KIT" on page 15 and "ROOM 2 Remote Controls" on page 31.)
• Each time the INPUT button on the universal remote
control is pressed, the ROOM 2 input can be selected
among MAIN source, TUNER, CD, TAPE, VIDEO 1 ~
VIDEO 5.
• The MUTE button on the ROOM 2 remote control can be
available only when the ROOM 2 function is operating.
• The tone level can be adjusted within the range of -10 ~
+10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
1.
Turn on the ROOM 2 function.
2.
Select the desired input as a ROOM 2 source.
3.
Adjust the ROOM 2 volume.
4.
Adjust the tone (bass and treble) for ROOM 2
source.
5.
Start play on the component related to the
ROOM 2 source.
Listening to ROOM 2 source
■
When selecting the tuner as a ROOM 2 source
• Tune in the desired preset station using the ROOM 2
remote control.
◆When using the buttons on the remote control unit
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 54