Sherwood Newcastle R-972 - Manual (Page 47)

47
E
N
G
L
IS
H
1.
Select the desired channel with preforming
channel search, direct search or category search.
2.
To memorize the channels, perform the steps 2 to
4 in "Manual presetting" procedure on page 44.
• You can store up to 30 preferred channels in the memory.
Presetting channels
• In the XM mode, select the desired preset channel.
Preset search
• You can display XM information such as channel name,
artist name, song title and signal strength.
Displaying xM information
• In the XM mode,
■
Error message and status
• If an operation takes longer than usual or an error occurs,
one of the following messages may be displayed.
• Each time the DISPLAY button is pressed, the display
mode changes as follows:
→ Channel name → Artist name → Song title
Surround mode*
←Signal strength ←Category ←
■Notes:
• If the information on artist name, song title or category is
not available, it will not be displayed correctly.
* : Surround mode is displayed for several seconds.
■
Signal strength display mode
• If the reception is poor, you can check the signal strength
of the XM radio signal and adjust the position of the XM
antenna until "SIGNAL : GOOD" is displayed.
Status
The XM antenna is not connected
correctly. Check the antenna.
The XM user encryption code is being
updated. Please wait.
The signal is too weak. Check the
antenna connection and reposition it
for the best reception.
This receiver is tuning or decoding
audio or text data. Please wait.
The selected XM channel is not
currently broadcasting. Select another
channel.
Message
CHECK
ANTENNA
UPDATING
NO SIGNAL
LOADING
OFF AIR
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 47