Sherwood Newcastle R-972 - Manual (Page 51)

E
N
G
L
IS
H
51
RECORDING
Recording with TAPE
• The audio and video signals from the desired input will
be dubbed onto the VIDEO 1 and you can enjoy them
on the TV set and from the speakers.
• The analog signals from the EXTERNAL INs as well as the digital signals from the USB IN, the HDMI IN, the OPTICAL or
COAXIAL DIGITAL IN can be heard but cannot be recorded.
• When recording the analog signals from CD, VIDEO 1~5, be sure to select "Analog" for the Audio Mode.
(For details, refer to "When selecting the Audio Mode" on page 71.)
• When recording the video signals from VIDEO 2~5, be sure to select "Composite" or "S-Video" for the Video Mode.
(For details, refer to "When selecting the Video Mode" on page 70.)
• The volume and tone (bass, treble) settings have no effect on the recording signals.
1.
Select the desired input as a recording source
except for TAPE.
1.
Select the desired of VIDEO 2 ~ 5 as a recording
source except VIDEO 1.
2.
Start recording on the VIDEO 1.
3.
Start play on the desired input.
2.
Start recording on the TAPE.
3.
Start play on the desired input.
Dubbing from video components onto
VIDEO 1
Dubbing the audio and video signals
separately onto VIDEO 1
Example: When dubbing the VIDEO 2 video signal and
the CD audio signal separately onto VIDEO 1.
1.
Select VIDEO 2 as a video recording source.
2.
Select CD as an audio recording source.
3.
Start recording on the VIDEO 1.
4.
Start play on the VIDEO 2 and the CD
respectively.
• The audio signal from the CD and the video signal from
the VIDEO 2 will be dubbed and you can enjoy them on
the TV set and from the speakers.
■Note :
• Be sure to observe the order of the above steps 1 and
2.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 51