Timer remote controller (rcs-tm80bg) – Sanyo CHX06052 User Manual

Page 58

2-40

Remote Control Functions

3. Timer Remote Controller (RCS-TM80BG)

Fire prevention input terminal (Setting data = 0002)

The pulse/static setting is not necessary (disabled).

Description of operation: When the HA signal turns ON, operation changes to stop and central 1 (start/stop by

remote controller prohibited). When this signal is OFF, use of the remote controller is permitted.

This function is used with Type A only.

Type U is not compatible with the fire prevention function. Therefore this function

cannot be used in a system where both A and U units are present.

CAUTION

OFF

HA operation signal
(T10 1-2 input)

Stop and remote controller prohibited

(central 1)

Remote controller permitted

Test run

Operation with
forced thermostat
ON

Press and hold the

button

for 4 seconds or longer.

Sensor
temperature
display

Temperature
display from each
sensor

Press and hold th

and

buttons for 4 seconds or longer.

Servicing check
display

Alarm history
display

Press and hold the

Current operation is
maintained.

Simple settings

Filter lifetime,
operating mode
priority, central
control address,
and other settings

Detailed settings

System address,
indoor unit address,
central control
address, and other
settings

Press and hold the

and

buttons for 4 seconds

or longer.

Press the

button.

When settings are made
from a remote controller,
the indoor unit where that
remote controller is
connected stops.

Automatic
address

Automatic address
setting based on
command from the
wired remote
controller

Press and hold th

and the

timer operation buttons

for 4 seconds or longer.

Automatic reset

Address change

Change of indoor
unit address

Entire system stops.

and

buttons for 4 seconds

or longer.

Press and hold the

and

Press the

button.

Press and hold th

and the

timer operation buttons

for 4 seconds or longer.

MiniECO-i.indb 40

2007/06/20 16:28:54