JVC LVT0858-001A - Manual (Page 46)

42
❏ Changing the transmittable signals for operating a
VCR
1 Press and hold VCR .
2 Press VCR.
3 Enter manufacturer’s code using buttons 1 – 9, and 0.
4 Release VCR
.
Now, you can perform the following operations on the VCR.
VCR : Turn on or off the VCR.
CHANNEL +/– : Change the channels.
1 – 10, 0, +10 (+100) : Select the channels.
PLAY : Start playback.
STOP : Stop playback or recording.
PAUSE : Pause playback. To release it, press
PLAY.
FF : Fast-wind a tape.
REW : Rewind a tape.
÷ REC : • Press this button with PLAY to start
recording.
• Press this button with PAUSE to
enter recording pause.
Note:
Refer also to the manual supplied with your VCR.
5 Try to operate your VCR by pressing VCR .
When your VCR turns on or off, you have entered the
correct code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
Mastering Remote Operations
❏ Changing the transmittable signals for operating a
TV
1 Press and hold TV .
2 Press TV.
3 Enter manufacturer’s code using buttons 1 – 9, and 0.
4 Release TV
.
Now, you can perform the following operations on the TV.
TV : Turn on or off the TV.
TV VOL +/– : Adjust the volume.
TV/VIDEO : Set the input mode (either TV or
VIDEO)
CHANNEL +/– : Change the channels.
1 – 10, 0, +10 (+100) : Select the channels.
Note:
Refer also to the manual supplied with your TV.
5 Try to operate your TV by pressing TV .
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Manufacturer Codes
JVC 01
Aiwa 02, 20
Bell+Howell 03, 16
Blaupunkt 04
CGM 03, 05, 16
Daewoo 34
Digtal 05
Fisher 03, 16
G.E. 06
Grundig 07
Hitachi 08, 09
Loewe 05, 10, 11
Magnavox 04, 05
Mitsubishi 12 – 15
Nokia 16
Nordmende 17 – 19, 31
Orion 20
Panasonic 21
Philips 05, 22
Phonola 05
Saba 17 – 19, 23, 31
Samsung 24, 25
Sanyo 03, 16
Sharp 26, 27
Siemens 07
Sony 28 – 30, 35
Telefunken 17 – 19, 31, 32
Toshiba 33
Manufacturers’ codes for VCR
Manufacturer Codes
JVC 01
Akai 02, 05
Blaupunkt 03
Daewoo 10, 31, 32
Fenner 04, 31, 32
Fisher 05
Grundig 06
Hitachi 07, 08
Inno-Hit 09
Irradio 02, 05
Magnavox 10
Mitsubishi 11, 33
Miver 03
Nokia 12, 34
Nordmende 13, 14, 18, 26 – 28
Okano 09
Orion 15
Panasonic 16, 17
Philips 10
Saba 13, 14, 18, 26 – 28
Samsung 10, 19, 32
Sanyo 05
Schneider 02, 05
Sharp 20
Sony 21 – 25
Telefunken 13, 14, 18, 26 – 28
Thomson 13, 14, 18, 26 – 28, 30
Toshiba 29
Manufacturers’ codes for TV
Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
EN38-46.RX-E111&112RSL[B]_f 02.1.17, 9:21 AM 42