Basic settings, Setting auto surround, Press setting – JVC LVT0858-001A User Manual
Page 22: Appears on the display, Press control 3 (or 2 ) to select “on” (or “off”), The control buttons now work for basic settings, Control 5/∞/3/2 display setting, Remote not
18
Basic Settings
Setting Auto Surround
Surround mode is automatically activated when a multichannel
signal comes into this unit through the digital terminal.
You can enjoy Surround mode simply by selecting the source (with
digital input selected for that source)—Auto Surround.
To activate Auto Surround, follow the procedure below.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
1
Press SETTING.
The CONTROL buttons now work for basic
settings.
2
Press CONTROL
∞ (or 5) repeatedly until
“AUTO SR (Auto Surround)” (with the current
setting)
*
appears on the display.
* “OFF” is the initial setting. If you have already changed the
setting, “ON” will be shown.
3
Press CONTROL
3 (or 2) to select “ON” (or
“OFF”).
• Each time you press the button, Auto Surround turns “ON” or
“OFF.”
Remote
NOT
2
Press CONTROL
∞ (or 5) repeatedly until
“D.COMP (Dynamic Range Compression)”
(with the current setting)
*
appears on the display.
* “MID” is the initial setting. If you have already changed the
setting, another setting will be shown.
3
Press CONTROL
3 (or 2) to select the
appropriate compression level.
• Each time you press the button, the compression level changes
as follows:
OFF
: Select this when you want to enjoy surround with its
full dynamic range. (No effect applied.)
MID
: Select this when you want to reduce the dynamic range
a little.
MAX
: Select this when you want to apply the compression
effect fully. (Useful at night.)
Note:
The result from compressing dynamic range differs for each source.
Ι
VOL
R
TT
ANALOG
PR
ΙΙ
SUBWFR LFE
VOL
AUTO SR
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
CONTROL
5/∞/3/2
Display
SETTING
SETTING
STB
VCR
TV
TAPE
FM/AM
TV DIRECT
DVD
MEMORY
CONTROL
ADJUST
SETTING
STANDBY
INPUT
ANALOG/DIGITAL
INPUT ATT
MASTER VOLUME
SURROUND
ON/OFF
SURROUND
MODE
ANALOG
PL
ΙΙ
SUBWFR LFE
SLEEP
MODE TA
ST
TUNED
INFO
HEWS
AUTO MUTING
MH
Z
KH
Z
VOL
AUTO
AUTO SR
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
DVD
STB
VCR
TV
TAPE
FM/AM
HOME CINEMA CONTROL CENTER
STANDBY/ON
PHONES
RDS
HP
CONTROL
CONTROL
PR
ΙΙ
VOL
UTO SR
PUT ATT
SP
CONTROL
ANALOG
PR
ΙΙ
SUBWFR LFE
VOL
AUTO SR
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
CONTROL
EN10-19.RX-E111&112RSL[B]_f
02.1.17, 9:19 AM
18