JVC LVT0858-001A - Manual (Page 25)

21
ANALOG PR ΙΙ
SUBWFR LFE
VOL
AUTO SR
INPUT ATT
DSP
L C R
LS S RS
LPCM
DOLBY D
DTS
Adjusting the Tone
You can adjust the bass and treble sounds as you like.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
2
Press CONTROL
∞ (or 5) repeatedly until
“BASS” or “TREBLE” (with the current
setting)
* appears on the display.
BASS : To adjust the bass.
TREBLE : To adjust the treble.
* “0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
3
Press CONTROL
3 (or 2) to adjust the sound
level.
• Pressing CONTROL 3 increases the sound level by 2 steps
(from –10 to +10).
• Pressing CONTROL 2 decreases the sound level by 2 steps
(from +10 to –10).
4
Repeat steps
2
and
3
to adjust the other sound
level.
When using the remote control
1 Press SOUND.
10 keys now work for sound adjustments.
2 Press BASS +/– or TREBLE +/– to adjust the sound level (from
–10 to +10).
ANALOG PR ΙΙ
SUBWFR LFE
VOL
AUTO SR
INPUT ATT
DSP
L C R
LS S RS
LPCM
DOLBY D
DTS
Sound Adjustments
Reinforcing the Bass
You can boost the bass level—Bass Boost.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
2
Press CONTROL ∞ (or 5) repeatedly until
“B. BOOST (Bass Boost)” (with the current
setting)
* appears on the display.
* “OFF” is the initial setting. If you have already changed the
setting, “ON” will be shown.
3
Press CONTROL 3 (or 2) to turn Bass Boost
“ON” or “OFF.”
ON : Select this to boost the bass level (Bass Boost).
OFF : Select this to deactivate Bass Boost.
Note:
This function affects the sound outputting only through the front
speakers.
When using the remote control
Press BASS BOOST.
• Each time you press the button, Bass Boost turns on and off
alternately.
ADJUST
CONTROL
Ex.: When adjusting the bass level.
CONTROL
ADJUST
CONTROL
VOL T
ANALOG PR ΙΙ
SUBWFR LFE
VOL
AUTO SR
INPUT ATT
DSP
L C R
LS S RS
LPCM
DOLBY D
DTS
CONTROL
EN20-22.RX-E111&112RSL[B]_f 02.1.17, 9:19 AM 21