Basic settings, Press setting, Appears on the display – JVC LVT0858-001A User Manual
Page 20: Press control 3 (or 2 ) to select the distance, Repeat steps, Speaker distance—frnt d, cntr d, rear d, The control buttons now work for basic settings, Ex.: when adjusting the front speakers distance

16
Basic Settings
Speaker Distance—FRNT D, CNTR D, REAR D
The distance from your listening point to the speakers is another
important element to obtain the best possible surround sound of the
Surround and DSP modes.
You need to set the distance from your listening point to the
speakers. By referring to the speaker distance setting, this unit
automatically sets the delay time of the sound through each speaker
so that sounds through all the speakers can reach you at the same
time.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
1
Press SETTING.
The CONTROL buttons now work for basic
settings.
2
Press CONTROL
∞ (or 5) repeatedly until
“FRNT D (Front Distance),” “CNTR D (Center
Distance)” or “REAR D (Rear Distance)” (with
the current setting)
*
appears on the display.
FRNT D (Front Distance) : To adjust the front speakers
distance from your listening point.
CNTR D (Center Distance): To adjust the center speaker
distance from your listening point.
REAR D (Rear Distance) : To adjust the rear speakers distance
from your listening point.
* “3.0 m” is the initial setting. If you have already changed the
setting, another setting will be shown.
Display
CONTROL
5/∞/3/2
SETTING
3
Press CONTROL
3 (or 2) to select the distance.
• Each time you press the button, the distance changes in
0.3 m intervals.
4
Repeat steps
2
and
3
to adjust the distance for
the other speakers.
Note:
If you have selected “NO” for the center and rear speakers setting,
you cannot set the speaker distance for the center and rear speakers.
Example: In this case,
set “FRNT D” to “3.0m,”
set “CNTR D” to “2.7m” and
set “REAR D” to “2.4m.”
STB
VCR
TV
TAPE
FM/AM
TV DIRECT
DVD
MEMORY
CONTROL
ADJUST
SETTING
STANDBY
INPUT
ANALOG/DIGITAL
INPUT ATT
MASTER VOLUME
SURROUND
ON/OFF
SURROUND
MODE
ANALOG
PL
ΙΙ
SUBWFR LFE
SLEEP
MODE TA
ST
TUNED
INFO
HEWS
AUTO MUTING
MH
Z
KH
Z
VOL
AUTO
AUTO SR
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
DVD
STB
VCR
TV
TAPE
FM/AM
HOME CINEMA CONTROL CENTER
STANDBY/ON
PHONES
RDS
HP
Ex.: When adjusting the front speakers distance.
ANALOG
PR
ΙΙ
SUBWFR LFE
VOL
AUTO SR
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
CONTROL
3.0 m
Left front
speaker
Right front
speaker
Right rear
speaker
Left rear
speaker
Center speaker
2.7 m
2.4 m
2.1 m
ANALOG
PR
ΙΙ
SUBWFR LFE
VOL
AUTO SR
INPUT ATT
DSP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
CONTROL
SETTING
EN10-19.RX-E111&112RSL[B]_f
02.1.17, 9:19 AM
16