JBL SYNTHESIS SDP-40 - Manual (Page 93)

• The BASS, TREBLE, TILT EQ, LOUDNESS, BALANCE, and FADER
parameters affect the Main Zone audio output connectors. This
includes all Main Zone inputs and listening modes, except the
5.1a BYPASS and 2CH BYPASS listening modes.
• The ZONE2 BALANCE parameter affects the Zone 2 audio
output connectors, including all Zone 2 inputs.
• The REC BALANCE parameter affects the Record Zone audio
output connectors, including all Record Zone inputs.
AUDIO CONTROLS
JBL
4-2
AUDIO CONTROLS
Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu shown below, which can be used to customize the
Main Zone, Zone 2, and Record Zone audio output connectors.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
AUDIO CONTROLS
AUDIO CONTROLS
BASS +0.0dB
TREBLE +0.0dB
TILT EQ +0.0dB
LOUDNESS ON
BALANCE <|>
FADER <|>
ZONE2 BALANCE <|>
RECORD BALANCE <|>
-6.0 to +6.0dB -3.0 to +3.0dB ON
OFF
B< <|> >F L< <|> >R
Default Possible
Parameter Setting Settings
BASS +0.0dB -6.0 to +6.0dB
TREBLE +0.0dB -6.0 to +6.0dB
TILT EQ +0.0dB -3.0 to +3.0dB
LOUDNESS ON ON, OFF
BALANCE <|> L< to <|> >R
FADER <|> B< to <|> >F
ZONE2 BALANCE <|> L< to <|> >R
REC BALANCE <|> L< to <|> >R
AUDIO CONTROLS menu parameter descriptions begin on the next page.