JBL SYNTHESIS SDP-40 - Manual (Page 89)

SETUP
JBL
3-49
Trigger Setup (continued from page 3-48)
REMOTE ONLY ON, OFF
Configures the selected trigger output connector for remote
operation. Select the ON setting to configure the selected connector
for remote operation. Select the OFF setting to configure the
selected connector for program operation. Refer to the Program
Operation Parameter description below for more information.
When configured for remote operation, the connector labeled 1
can be activated and deactivated with the MODE + and – buttons
when the Zone 2 command bank is activated, and the connector
labeled 2 can be activated and deactivated with the MODE + and –
buttons when the Record Zone command bank is activated.
Note:
When the REMOTE ONLY parameter is set to ON, all
TRIGGER SETUP menu program operation parameter
settings are ignored.
Program Operation Parameters ON, OFF
Configure the selected trigger output connector for program
operation when the REMOTE ONLY parameter is set to OFF. Select
the ON setting to associate the selected connector with the
corresponding input(s) or listening mode.
Program Operation Parameter TRIGGER 2 OR TRIGGER 1 TRIGGERS SETUP
REMOTE ONLY TRIGGER 2 OR TRIGGER 1 TRIGGERS SETUP
TRIGGER 2 SETUP
REMOTE ONLY OFF
DVD1 OFF
DVD2 OFF
LD OFF
TV OFF
SAT OFF
VCR OFF
CD OFF
PVR OFF
GAME OFF
TAPE OFF
TUNER OFF
AUX OFF
ZONE2 INPUTS OFF
RECORD INPUTS OFF
FILM OFF
TV OFF
MUSIC ON
MUSIC SURR ON
PLII + OFF
PLII MOVIE OFF
PLII MUSIC ON
PRO LOGIC OFF
FILM OFF
MUSIC OFF
NIGHTCLUB OFF
CONCERT HALL OFF
CHURCH OFF
CATHEDRAL OFF
PANORAMA OFF
PARTY ON
2-CHANNEL OFF
MONO LOGIC OFF
MONO SURROUND OFF
MONO OFF
5.1 FILM OFF
5.1 TV OFF
5.1 MUSIC ON
5.1 SurEX OFF
5.1 MUSIC OFF
DIGITAL EX OFF
5.1 2-CHANNEL OFF
5.1 MONO LOGIC OFF
5.1 MONO SURR OFF
5.1 MONO OFF
FILM OFF
MUSIC ON
OFF
MUSIC OFF
OFF
2-CHAN OFF
5.1a FILM OFF
5.1a MUSIC OFF
5.1a SurEX OFF
5.1a MUSIC OFF
5.1a STANDARD OFF
5.1a 2-CHANNEL OFF
5.1a BYPASS OFF
2CH BYPASS OFF
R
R
TRIGGER SETUP
TRIGGER 1 REMOTE
TRIGGER 2 REMOTE