JBL SYNTHESIS SDP-40 - Manual (Page 149)

Appendix
JBL
A-4
Specifications (continued from page A-3)
Specifications are subject to change without notice.
Other
• 1 power on/off and 2 programmable connectors on
detachable screw terminals (+12 VDC, 0.5 amps each)
Trigger Outputs
• 2 9-pin D-sub connectors
• 90-250 VAC, 50-60Hz, 90W (universal line input),
detachable power cord
• Hand-held, backlit infrared remote control unit
• Requires 2 AA batteries (Alkaline batteries recommended)
• Height (with feet): 5.2 inches (132mm)
• Width: 17.3 inches (440mm)
• Depth: 14.85 inches (377mm)
• Weight: 36lbs (16.4kg)
• Height (with feet): 6.63 inches (169mm)
• Width: 17.3 inches (440mm)
• Depth: 14.85 inches (377mm)
• Weight: 45lbs (20.5kg)
• Optional brackets are available for installation in a stan-
dard 19" equipment rack (2 rack units required for
SDP-40).
• Operating Temperature: 0° to 35°C (32° to 95°F)
• Storage Temperature: -30° to 75°C (-22° to 167°F)
• Relative Humidity: 95% maximum without condensation
RS-232 Serial Input/
Output
Power Requirements
SDP-40
Dimensions & Weight
SDP-40 Balanced
Dimensions & Weight
Rack Mounting
Environment
Remote Control
DECLARATION OF CONFORMITY
Application of Council Directive(s):
89/336/EEC and 93/68/EEC
Standard(s) to which Conformity is Declared:
EN55022:1998, EN55024:1998, EN61000-3-2: 2000,
EN61000-3-3:2000, and EN60065: 1998
Manufacturer: Lexicon, Inc.
3 Oak Park
Bedford, MA 01730-1413 USA
The equipment identified here conforms to the Directive(s)
and Standard(s) specified above.
Type of Equipment: Digital Controller
Model: JBL SDP-40
Date: June 2003
Lexicon, Inc.
Vice President of Engineering
3 Oak Park
Bedford, MA 01730-1413 USA
Tel: 781-280-0300
Fax: 781-280-0490