JBL SYNTHESIS SDP-40 - Manual (Page 29)

Basic Operation
SDP-40
2-13
DVD-1 DVD-2 L D
TV
CD
TAPE TUNER
MENU
PVR
SAT
FP
BLUE
OSD
VCR
AUX
GAME
MAIN
SHIFT
STAT
7 / 5 2 CH
MUTE
MUSIC
ZONE REC
LIGHT
MODE VOL
Shift Record Zone Main Zone Button Zone 2
1 2
3
4
1
Activates and deactivates standby mode when the SDP-40 is powered on with the rear panel power
switch. The standby button performs no function when the SDP-40 is powered off with the rear
panel power switch. When standby mode is activated, pressing the standby button deactivates
standby mode and activates the SDP-40, including all zones that were activated during the previ-
ous operating session. When standby mode is deactivated, pressing the standby button activates
standby mode and deactivates the SDP-40. The red front panel standby button LED lights to indi-
cate that standby mode is activated.
Note: Power is still supplied to the SDP-40 when standby mode is activated.
Activates the remote control back-light, illuminating remote control buttons to make them more
visible in the dark. The back-light also activates whenever a remote control button is pressed. No
matter how the back-light is activated, it automatically fades about 5 seconds after the last remote
control command is received.
Activates the Main Zone command bank, which includes commands that control the Main Zone.
MAIN
ZONE
REC
SHIFT
D VD -1
D VD -2
L D
T V
LIG
HT
3
Activates the Zone 2 command bank, which includes commands that control Zone 2 and the Main
Zone.
Activates the Record Zone command bank, which includes commands that control the Record and
Main Zones.
Activates the Shift command bank, which includes commands that control the Main Zone.
2
Deactivates the Record
Zone.
Sets the AUDIO
CONTROLS menu
LOUDNESS parameter
to ON.
Selects the LD input
for the Main Zone.
Selects the TV input
for the Main Zone.
Selects the LD input
for Zone 2.
Selects the TV input
for Zone 2.
Selects the LD input
for the Record Zone.
Selects the TV input
for the Record Zone.
Selects the DVD1 input
for the Main Zone. Selects the DVD1 input
for Zone 2. Selects the DVD1 input
for the Record Zone.
Selects the DVD2 input
for the Main Zone. Selects the DVD2 input
for Zone 2. Selects the DVD2 input
for the Record Zone.
Deactivates the Main
Zone.
Deactivates Zone 2.
4