JBL SYNTHESIS SDP-40 - Manual (Page 70)

SETUP
JBL
3-30
LFE ON, OFF
Activates and deactivates the Main Zone audio output connector
labeled LFE.
When a custom speaker setup is selected:
• Select ON to activate the LFE output connector, configuring
the Main Zone audio output connectors for a 7.1-channel
speaker setup. The SDP-40 sends LFE information to the LFE
output connector.
LFE CUSTOM SETUP SET CROSSOVERS SPEAKERS SETUP
• Select OFF to deactivate the LFE output connector, configuring
the Main Zone audio output connectors for a 5.1-channel
speaker setup. The SDP-40 redirects LFE information to the
Subwoofer L/R output connectors. If the SUB L/R parameter is
set to OFF, the SDP-40 redirects LFE information to the speakers
with the lowest crossover point.
When a SYNTHESIS 7CH speaker setup is selected, the LFE param-
eter cannot be adjusted. The SDP-40 automatically deactivates the
LFE output connector and redirects LFE information to the
SubwooferL/R output connectors.
SYNTHESIS 7CH SETUP SET CROSSOVERS SPEAKERS SETUP
Setting Crossover Points (continued from page 3-29)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
80Hz 80Hz
80Hz 80Hz 80Hz
80Hz 80Hz
80Hz
L M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUB L/R MONO
SUB XOVER 80Hz
LFE
OFF
ULTRA2 SUB OFF
BGC N/A
ASA APART
SYNTHESIS 7CH SETUP
!CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A
SYNTHESIS
7CH SPEAKER
CONFIGURATION
SYNTHESIS 7CH SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUB L/R MONO
SUB XOVER 80Hz
LFE
OFF
ULTRA2 SUB OFF
BGC N/A
ASA APART
!CAUTION!
ON
OFF
APART
CLOSE
TOGETHER