JBL SYNTHESIS SDP-40 - Manual (Page 130)

MODE ADJUST
JBL
5-32
2CH BYPASS
• Designed for playback of 2-channel analog sources.
• Sends analog audio input signals to the Main Zone audio
output connectors labeled Front L/R. These signals receive no
internal processing.
• The 2CH BYPASS listening mode is automatically activated
whenever a 2-channel analog source is present and the MAIN
ADV menu ANALOG BYPASS parameter is set to ON.
• The 2CH BYPASS listening mode is not available when a digital
source is present and the MAIN ADV menu INPUT SELECT
parameter is set to AUTO.
Note:
Speaker crossover settings, speaker distances, and
audio controls (tone controls) are not available when
the 2CH BYPASS listening mode is activated.
2CH BYPASS MODE ADJUST
OUTPUT LEVELS
Opens the OUTPUT LEVELS menu shown at
the right, which can be used to adjust output
levels for the Main Zone audio output
connectors labeled Center, Subwoofer L/R,
LFE, Side L/R, and Rear L/R.
The OUTPUT LEVELS option does not appear on listening mode
menus when the selected listening mode does not accommodate
multi-channel output signals. Instead, an output-specific parameter
appears. For instance, the MONO listening mode menu includes a
SUB L/R LVL parameter.
Default Possible
Parameter Setting Settings
CENTER +0dB OFF, -30 to +12dB
SIDE L/R +0dB OFF, -30 to +12dB
REAR L/R +0dB OFF, -30 to +12dB
SUB L/R +0dB OFF, -30 to +12dB
LFE +0dB OFF, -30 to +12dB
Listening mode menu parameter descriptions begin on page 5-34.
Note:
The OUTPUT LEVELS menu does not include the LFE
parameter unless an LFE subwoofer is present.
OUTPUT LEVELS Listening Mode MODE ADJUST
OUTPUT LEVELS
CENTER +0dB
SIDE L/R +0dB
REAR L/R +0dB
SUB L/R +0dB
LFE +0dB