JBL SYNTHESIS SDP-40 - Manual (Page 61)

SETUP
SDP-40
3-21
SPEAKER SETUP
Selecting the SETUP menu SPEAKERS option opens the SPEAKER
SETUP menu shown below, which can be used to configure the
Main Zone audio output connectors for the desired speaker setup.
The Main Zone includes 10 unbalanced audio output connectors
labeled Front L/R, Center, LFE, Subwoofer L/R, Side L/R, and Rear
L/R. Two additional audio output connectors labeled Aux L/R are
provided for future expansion.
SPEAKERS SETUP
Note:
The SDP-40 Balanced also includes 10 balanced
Main Zone audio output connectors labeled Front
L/R, Center, LFE, Subwoofer L/R, Side L/R, and Rear
L/R. Two additional audio output connectors labeled
Aux L/R are provided for future expansion.
SETTING CROSSOVER POINTS
Selecting the SPEAKER SETUP menu SET CROSSOVERS option
opens the CROSSOVER SETUP menu shown above, which can be
used to configure a custom or SYNTHESIS 7CH speaker setup.
SET CROSSOVERS SPEAKERS SETUP
Note:
It is important to set crossover points before
calibrating output levels. Otherwise, setting crossover
points afterwards might invalidate calibrated output
levels.
. . . Setting Crossover Points continues on page 3-22
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7 CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L M
SUB
R
C
SL
SR
RL
RR