Mode adjust – JBL SYNTHESIS SDP-40 User Manual
Page 126
MODE ADJUST
JBL
5-28
5.1a MUSIC
•
A proprietary listening mode.
•
Similar to the 5.1a
FILM listening mode, but specifically
tailored for music sources.
•
Designed for enhanced playback of 5.1-channel analog music
sources.
•
Recommended for 5.1-channel analog music sources.
Default
Possible
Parameter
Setting
Settings
VOCAL ENHANCE
+0.0dB
+6.0dB, +3.0dB, +0.0dB
5 SPKR ENHANCE
ON
ON, OFF
BASS ENHANCE
OFF
ON, OFF
RE-EQUALIZER
OFF ON,
OFF
REAR DLY OFFSET
15ms
OFF, 1 to 30ms
LFE MIX
+0.0dB
-10.0 to +0.0dB
OUTPUT LEVELS
Refer to page 5-32
CUSTOM
Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
5.1a
L7
MUSIC
MODE ADJUST
5.1a ULTRA2,
5.1a SurEX,
&
5.1a
Listening mode name differs depending on the encoding present
in the input source, the SURROUND EX parameter setting, and the
speaker setup. The table at the top of the next page indicates the
conditions in which THX Ultra2 and THX Surround EX decoding are
engaged.
•
The 5.1a
ULTRA2 listening mode is available when THX
Ultra2 decoding is engaged.
•
THX Ultra2 decoding is engaged when the SURROUND EX
parameter is set to OFF.
•
The 5.1a
SurEX listening mode is available when THX
Surround EX decoding is engaged.
•
THX Surround EX decoding is engaged when the SURROUND
EX parameter is set to ON.
•
The 5.1a
Ultra2 and 5.1a
SurEX listening modes are
not available unless both side and rear speakers are present.
•
The 5.1a
listening mode is available when neither THX
Ultra2 nor THX Surround EX decoding is engaged.
Note:
The SDP-40 cannot automatically detect THX
Surround EX encoding in non-flagged 5.1-channel
analog sources. A non-flagged input source does not
include information in the input signal that identifies
THX Surround EX encoding.
5.1a
@**
OR
5.1a
@**
SurEX
OR
5.1a
@**
ULTRA2
MODE ADJUST