JBL SYNTHESIS SDP-40 - Manual (Page 48)

ON
OFF
SETUP
JBL
3-8
ANLG IN LVL AUTO, -18 to +12dB
Opens the ANLG IN LVL menu shown above, which can be used to
adjust 2-channel analog audio input levels for the selected input.
Despite attempts at standardization, analog sources still have a
wide range of input levels. To compensate for this, the SDP-40
allows independent input level adjustment for each of its stereo
analog audio input connectors. Input level adjustment is not
available for the 5.1-channel analog audio input connector.
ANLG IN LVL DVD1 INPUTS SETUP
Parameter Possible Settings
AUTO ON, OFF
MANUAL -18 to +12dB
AUTO GAIN* -18 to +12dB
* This parameter cannot be adjusted.
Note:
ANLG IN LVL menu adjustments are applied to the
stereo analog audio input connector assigned for the
selected input. When another stereo analog audio
input connector is assigned, these adjustments are
automatically applied to the new connector.
Assigning Audio & Video Input Connectors (continued from page 3-7)
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX INPUTS DVD1
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH FILM
D 5.1 FILM
FILM
5.1a 5.1a FILM
MAIN ADVANCED
ZONE2 IN
DIGITAL
RECORD IN DIGITAL
RECORD ADVANCED
ANLG IN LVL AUTO
DVD1 ANLG IN LVL
AUTO OFF
MANUAL +0dB
AUTO GAIN +0.0dB
L C R SL SR SB LFE
X X X X X X X
0
-6
-15
-30
-45
dB
-18 to +12dB