JBL SYNTHESIS SDP-40 - Manual (Page 50)

SETUP
JBL
3-10
VIDEO IN COMPOSITE-1 to 5, S-VIDEO-1 to 8, NONE
Opens the VIDEO IN menu shown below, which can be used to
assign a composite or S-video input connector for the selected
input.
Note:
• Composite video output connectors are available
when a composite or S-video source is present.
• S-video output connectors are available when an
S-video source is present.
VIDEO IN DVD1 INPUTS SETUP
COMPONENT IN COMPONENT-1 to 4
Opens the COMPONENT menu shown at the top of the next page,
which can be used to assign a component video input connector
for the selected input.
Note:
• Component video output connectors are only
available when a component video source is
present.
COMPONENT IN DVD1 INPUTS SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
Assigning Audio & Video Input Connectors (continued from page 3-9)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX INPUTS DVD1
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH FILM
D 5.1 FILM
FILM
5.1a 5.1a FILM
MAIN ADVANCED
ZONE2 IN
DIGITAL
RECORD IN DIGITAL
RECORD ADVANCED
VIDEO IN S-VIDEO-1
DVD1 VIDEO IN
COMPOSITE-1
COMPOSITE-2
COMPOSITE-3
COMPOSITE-4
COMPOSITE-5
S-VIDEO-1
S-VIDEO-2
S-VIDEO-3
S-VIDEO-4
S-VIDEO-5
S-VIDEO-6
S-VIDEO-7
S-VIDEO-8
NONE