JBL SYNTHESIS SDP-40 - Manual (Page 125)

MODE ADJUST
SDP-40
5-27
& 2-CHAN
• Designed for converting 5.1- or 6.1-channel dts(-ES) input
signals into 2-channel LOGIC7-encoded output signals.
• Sends downmixed 5.1- or 6.1-channel dts(-ES) input signals to
the front speakers and the subwoofer.
• Recommended for recording purposes.
Default Possible
Parameter Setting Settings
CENTER MIX +0dB -25 to +5dB
SURROUND MIX +0dB -5 to +5dB
CNTR DLY SAMPLES +0 -127 to +127
MASTER LEVEL +0dB -5 to +5dB
LFE MIX +0.0dB -20.0 to +0.0dB
DECODING AUTO AUTO, ON, OFF
SUB L/R LVL +0dB OFF, -30 to +12dB
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
@@@* 2-CHAN MODE ADJUST
5.1a FILM
• A proprietary listening mode.
• Designed for enhanced playback of 5.1-channel analog film
sources.
• Derives seven channels from 5.1-channel analog sources.
• Converts 5.1-channel analog input signals into digital audio for
internal LOGIC7 decoding.
• Allows 5.1-channel analog sources to use bass management,
speaker crossovers, speaker distance calibration, and audio
controls (tone controls).
• Recommended for 5.1-channel analog film sources.
Default Possible
Parameter Setting Settings
VOCAL ENHANCE +0.0dB +6.0dB, +3.0dB, +0.0dB
5 SPKR ENHANCE ON ON, OFF
BASS ENHANCE OFF ON, OFF
RE-EQUALIZER ON ON, OFF
REAR DLY OFFSET 15ms OFF, 1 to 30ms
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
5.1a L7 FILM MODE ADJUST