JBL AV1 - Manual (Page 94)

Audio Controls
JBL Performance
4-2
AUDIO CONTROLS
Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu, which can be used to customize the audio output
connectors. These parameter settings affect all inputs and listening modes selected, except the 5.1a BYPASS and 2CH BYPASS listening modes.
AUDIO CONTROLS menu parameter descriptions begin in the next column.
Note:
Pressing and holding the S2 button while pressing and releasing
the Blue button sets the BASS, TREBLE, and TILT EQ parameters
to +0.0dB.
BASS -6.0dB to +6.0dB
Controls the amount of low-frequency boost or cut applied to the
audio output connectors labeled Front L/R, Center and Subwoofer.
The graph shown on the left of the next page illustrates the fre-
quency response of BASS parameter settings.
TREBLE -6.0dB to +6.0dB
Controls the amount of boost or cut applied to the audio output
connectors labeled Front L/R and Center. The Treble parameter set-
tings graph on the next page illustrates the frequency response of
TREBLE parameter settings.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
AUDIO CONTROLS
BASS
TREBLE
TILT EQ
LOUDNESS
BALANCE
FADER +0.0dB
+0.0dB
+0.0dB
OFF
-6.0 to +6.0dB
Default
Parameter Possible
Value
Settings
BASS +0.0dB -6.0dB to +6.0dB
TREBLE +0.0dB -6.0dB to +6.0dB
TILT EQ +0.0dB -3.0dB to +3.0dB
LOUDNESS OFF ON, OFF
BALANCE <|> L< to <|> to >R
FADER <|> B< to <|> to >F
AUDIO CONTROLS BASS
AUDIO CONTROLS TREBLE