JBL AV1 - Manual (Page 27)

AV1
Basic Operation
2-9
COMMAND BANK ACTIVATION
The remote control buttons perform different commands depend-
ing on which command bank is activated. The remote control con-
tains three command banks:
• default
• S1 (Shift 1)
• S2 (Shift 2)
The default command bank remains activated unless the Shift 1 or
Shift 2 command bank is activated.
The Shift 1 and Shift 2 buttons themselves do not send commands
to the AV1. When pressed and held, these buttons activate the
associated command bank. For instance, pressing the remote con-
trol L7 button selects the Logic 7 listening mode. Pressing and
holding the Shift 1 button while pressing the L7 button selects the
Panorama listening mode. Pressing and holding the Shift 2 button
while pressing the L7 button selects the PARTY listening mode.
The default command bank does not need to be activated; it
remains activated unless the Shift 1 or Shift 2 command bank is
activated.
• Pressing and holding the remote control S1 button activates
the Shift 1 command bank.
• Pressing and holding the remote control S2 button activates
the Shift 2 command bank.
• The S1 and S2 buttons themselves do not send commands to
the AV1. When pressed and held, these buttons activate the
associated command bank.
To activate the Shift 1 or Shift 2 command bank:
1. Press and hold the remote control S1 button or S2 button to
activate one of the command banks.
2. While holding the selected button, press the desired remote
control button to send the associated command to the AV1.
3. Release the S1 or S2 button to deactivate the associated com-
mand bank.
The ON-SCREEN DISPLAY menu REMOTE STATE parameter controls
the remote control command bank indicator. When the REMOTE
STATE parameter is set to ON, a command bank indicator appears
in the top-right corner of the on-screen display indicating the last
command bank used. When the REMOTE STATE parameter is set to
OFF, no command bank indicator appears on the on-screen display.
• A "1" appears when a command from the Shift 1 command
bank was received last.
• A "2" appears when a command from the Shift 2 command
bank was received last.
• No letter appears when a command from the default com-
mand bank was received last.