JBL AV1 - Manual (Page 72)

Setup
JBL Performance
3-34
THX SPEAKER SETUPS (continued)
REAR L/R THX 80HZ, NONE
Opens the THX REAR SPEAKERS menu, which is used to activate
and deactivate the audio output connectors labeled Rear L/R. When
set to THX 80Hz, the AV1 activates these connectors and configures
all audio output connectors for a 7.1-channel THX speaker setup.
When set to NONE, the AV1 deactivates these connectors and con-
figures the other audio output connectors for a 5.1-channel THX
speaker setup.
Note:
When the REAR L/R parameter is set to NONE, Dolby Digital Surround EX,
THX Ultra2, THX Surround EX and DTS-ES decoding are not available,
and the ASA parameter is unavailable.
The THX SETUP menu THX ULTRA2 SUB, BGC and ASA parameters
are identical to the CUSTOM SETUP menu THX ULTRA2 SUB, BGC
and ASA parameters. When one of these parameter settings is
adjusted on one menu, it is automatically adjusted on the other
menu at the same time. See pages “THX ULTRA2 SUB”, “BGC” and
“ASA” on page 3-32 for these parameter descriptions.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
C
R SR RR
L SL RL M
SUB
40Hz 60Hz 60Hz
60Hz
40Hz 40Hz 60Hz 60Hz
THX SETUP
FRONT L/R*
CENTER*
SIDE L/R*
REAR L/R
SUBWOOFER*
ULTRA2 SUB
BGC
ASA 40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
THX SPEAKER SETUP
!CAUTION!
PRESSING THE
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A THX
SPEAKER
CONFIGURATION
* These parameters cannot be
adjusted.
THX REAR SPEAKERS
THX 80Hz
NONE
REAR L / R SPEAKERS SETUP THX SETUP