beautypg.com

Mode adjust – JBL AV1 User Manual

Page 111

background image

AV1

Mode Adjust

5-13

6. When playback of the calibration source is in progress, set the

SPEAKER ANGLE parameter (next column) so the sound is not
heard in the left ear.

7. Set the SOURCE parameter to LEFT.

8. When playback of the calibration source is in progress, set the

SPEAKER ANGLE parameter so the sound is not heard in the right ear.

9. Set the SOURCE parameter to LEFT & RIGHT to confirm the

SPEAKER ANGLE and LISTENER POS parameter settings. When the
PANORAMA listening mode is properly calibrated, the sound
should be perceived to come from all around the primary listening
position. If this does not occur, begin again with step 1.

SOURCE

RIGHT, LEFT & RIGHT, LEFT

Controls the perceived direction of the calibration source signal.
When set to RIGHT, the sound is perceived to come from the right
of the primary listening position. When set to LEFT, the sound is
perceived to come from the left of the primary listening position.
When set to LEFT & RIGHT, the sound is perceived to come from all
around the primary listening position.

Note:

The SOURCE parameter controls the perceived direction of the
sound, although both the front left and right speakers generate
the calibration source signal.

The +0 setting indicates a primary listen-
ing position centered between the front
left and right speakers.

Negative settings (-127 to -1) compen-
sate for primary listening positions
located to the left of the center between
the front left and right speakers.

Positive settings (+1 to +127) compen-
sate for primary listening positions
located to the right of the center between
the front left and right speakers.