JBL AV1 - Manual (Page 81)

AV1
Setup
3-43
REAR PANEL CONFIG
Selecting the SETUP menu REAR PANEL CONFIG option opens the REAR PANEL CONFIG menu, which is used to configure the analog audio
input connectors as eight stereo connectors, one 5.1-channel and five stereo connectors or two 5.1-channel and two stereo connectors.
8 STEREO INPUTS
Configures the analog audio input connectors as eight stereo con-
nectors, (the factory-default configuration).
When the analog audio input connectors are configured as
eight stereo connectors:
• All connectors are configured as stereo connectors.
• Neither of the 5.1-channel connectors is available. Sources
assigned to the 5.1-channel connectors are reassigned to the
corresponding stereo connectors.
5 ST. & (1) 5.1 ANLG
Configures the analog audio input connectors as five stereo and
one 5.1-channel connectors.
When the analog audio input connectors are configured as five
stereo and one 5.1-channel connectors:
• The connectors labeled 1, 2, 3, 4 and 5 are configured as stereo
connectors.
• The connectors labeled 6, 7 and 8 are configured as a 5.1-
channel connector. This connector is sent to the audio output
connectors as indicated in the table on the next page.
REAR PANEL CONFIG SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
REAR PANEL CONFIG
8 STEREO INPUTS
OR
5 ST. & (1) 5.1 ANLG
OR
2 ST. & (2) 5.1 ANLG
REAR PANEL CONFIG SETUP 8 STEREO INPUTS REAR PANEL CONFIG SETUP 5 ST. & (1) 5.1 ANLG