JBL AV1 - Manual (Page 100)

Mode Adjust
JBL Performance
5-2
MODE ADJUST
Selecting the MAIN MENU MODE ADJUST option opens the MODE ADJUST menu
shown to the left, which is used to select a listening mode for adjustment. When the
MODE ADJUST menu opens, the currently activated listening mode is highlighted.
Selecting a listening mode does not activate that listening mode for the
current input source. Rather, selecting a listening mode opens the corresponding
listening mode menu, which can be used to customize the activated listening mode.
These adjustments are applied when that listening mode is selected with one of the
methods described in the Listening Mode Activation section that begins below.
LISTENING MODE ACTIVATION
Listening modes are available for 2-channel, Dolby Digital, DTS(-ES) and analog input
sources. The AV1 allows listening mode selection for all sources. In some cases, the
AV1 automatically activates a listening mode in response to certain commands. For
this reason, it is important to understand the three methods through which listening
mode activation occurs.
Listening modes can be activated with:
• The INPUT SETUP menu preferred listening mode selection parameters.
• The front panel or remote control Mode and buttons.
• The remote control mode family selection buttons.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
MODE ADJUST
FILM
TV
MUSIC
MUSIC SURR
PLII MOVIE
PLII MUSIC
PLII +
PRO LOGIC
PL +
CIN
MUSIC
+
NIGHTCLUB
CONCERT HALL
CHURCH
CATHEDRAL
PANORAMA
PARTY
2-CHANNEL
MONO LOGIC
MONO SURROUND
MONO
5.1 FILM
5.1 TV
5.1 MUSIC
SurEX
MUSIC
DIGITAL EX*
5.1 2-CHANNEL
5.1 MONO LOGIC
5.1 MONO SURR
5.1 MONO
MUSIC
2-CHAN*
5.1a BYPASS
2CH BYPASS
*
FILM*
MUSIC*
*