JBL AV1 - Manual (Page 90)

Setup
JBL Performance
3-52
TRIGGER SETUP
Selecting the SETUP menu TRIGGER option opens the TRIGGER
SETUP menu, which is used to configure the programmable
trigger output (Trigger 1) in the 5-pin DIN connector located
on the back panel. The 5-pin DIN connector provides 12VDC
outputs for externally controlling compatible components. The
Power Trigger pin cannot be configured and is active when the
AV1 is active (not in Standby). The Trigger 1 output pin can be
configured for remote or programmed operation. The Trigger 2
output cannot be configured, but provides an output voltage
that is opposite that of the Trigger 1 output pin. If Trigger 1 is
ON (at 12VDC), Trigger 2 is at ground potential. If Trigger 1 is
OFF (at ground), Trigger 2 is at 12VDC.
All TRIGGER SETUP menu parameters – except the REMOTE ONLY parameter –
are considered program operation parameters.
Parameter
Default
Setting Possible
Settings
REMOTE ONLY ON ON, OFF
Program Operation OFF ON, OFF
TRIGGER SETUP
REMOTE ONLY ON, OFF
Configures Trigger 1 for remote operation. When ON, Trigger 1 is configured for remote
operation. Pressing and holding the S1 button while pressing and releasing the OSD
button activates the connector. Pressing and holding the S1 button while pressing and
releasing the Blue button deactivates the connector. The AV1 ignores all other TRIGGER
SETUP menu parameter settings. When OFF, Trigger 1 is not configured for remote
operation. It can be configured for program operation.
TRIGGER SETUP REMOTE ONLY
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
Trigger 2
Trigger 1
Power Trigger Ground
Ground
TRIGGER SETUP
REMOTE ONLY
DVD1
DVD2
ON
OFF
SAT
VCR
TV
CD
TUNER
AUX
FILM
TV
MUSIC
MUSIC SURR
PLII MOVIE
PLII MUSIC
PLII +
PRO LOGIC
PL +
CIN
MUSIC
+
NIGHTCLUB
CONCERT HALL
CHURCH
CATHEDRAL
PANORAMA
PARTY
2-CHANNEL
MONO LOGIC
MONO SURROUND
MONO
5.1 FILM
5.1 TV
5.1 MUSIC
SurEX
MUSIC
DIGITAL EX
5.1 2-CHANNEL
5.1 MONO LOGIC
5.1 MONO SURR
5.1 MONO
FILM
MUSIC
MUSIC
2-CHAN
5.1a BYPASS
2CH BYPASS
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF * TRIGGER SETUP menu
listening mode names
are fixed, meaning
these names do not
change when certain
encoding is present.
For instance, the 5.1
THX SurEX listening
mode label appears
whether THX Ultra2,
THX Surround EX, or
n o e n c o d i n g i s
engaged.